Compaq Infortrend manual Deleting a Partition of a Logical Drive

Deleting a Partition of a Logical Drive

Press ENT for two seconds to enter the Main Menu. Press ▼ or ▲ to select "View and Edit Logical Drives..,” then press ENT.

Press ▼ or ▲ to select a logical drive, then press ENT.

Press ▼ or ▲ to choose “Partition Logical Drive," then press ENT.

The first partition’s information will be shown on the LCD. Press ▼ or ▲ to browse through the existing partitions in the logical drive. Select a partition by pressing ENT for two seconds.

Use ▼ or ▲ to change the number of the flashing digit to “0," then press ENT to move to the next digit. After changing all the digits, press ENT for two seconds.

The rest of the drive space will be automatically allocated to the last partition as diagrammed below.

View and Edit Logical Drives ↕

LG0 RAID5 DRV=3 2012MB GD SB=1

Partition Logical Drive ..

LG=0 Partition=1

200MB ?

LG=0 Partition=1

300MB ?

LG=0 Partition=2

600MB ?

Figure 5 - 1 Drive Space Allocated to the Last Partition

Logical Drive		Logical Drive
1000MB		1000MB
Partition 0 - 100MB		Partition 0 - 100MB
Partition 1 - 200MB
Partition 2 - 300MB	Delete	Partition 1 - 300MB
	Partition 1
Partition 3 - 400MB

•The capacity of the deleted partitions will be added to the last partition.

Partition 2 - 600MB

= 400 + 200

WARNING!

•Whenever there is a partition change, data will be erased, and all host LUN mappings will be removed. Therefore, every time the size of a partition has been changed, it is necessary to re-configure all host LUN mappings of the associated partitions.

Front Panel Operation 5-17