Compaq Infortrend manual Configuration Procedure

1.Host HBA port name (WWPN) list: Host A = 0x…F111

Host B = 0x…F112 Host C = 0x…F222

2.Controller Configuration:

•Logical drives are LD0 and LD1. LD0 is partitioned into two: P0 and P1.

•Filter Entry (LUN map) list

Configuration Procedure:

1.Create an entry list for the specific logical unit from "View and Edit Host LUN"\Host Channel\Create Host Filter Entry."

2.Select Host Channel ID, and then select a configured logical unit (a logical drive, logical volume, or one of its logical partitions) to create the entry. The entry submenu will appear.

3.Enter and modify the Host ID, Host ID Mask, Filter Type, and Access Mode.

The exemplary entry list is shown below. Please refer to the diagram above:

Entry 1: "LD0-P0, ID=0x…F111, Mask=0x…FFFE, Filter Type = Include, Access Mode = Read/Write." It means Host A and B can read/write P0 of LD0.

Entry 2: "LD0-P1, ID=0x…F222, Mask=0x…FFFF, Filter Type = Exclude, Access Mode = Read/Write." It means Host A and B can read/write P1 of LD0, but this partition is inaccessible for Host C.

Fibre Operation 8-21