Compaq Infortrend manual Adding a Global Spare Drive, Rebuild Settings, 5-15

Adding a Global Spare Drive

Press ENT for two seconds to enter the Main Menu. Press ▼ or ▲ to select "View and Edit SCSI Drives," then press ENT.

SCSI drive information will be displayed on the LCD. Press ▼ or ▲ to select a SCSI drive that has not been assigned to any logical drive yet, then press ENT.

Press ▼ or ▲ to select “Add Global Spare Drive,” then press ENT.

Press ENT again for two seconds to add the spare drive. The message “Add Global Spare Drive Successful” will be displayed on the LCD.

View and Edit SCSI Drives ↕

C=2 I=4 1010MB

NEW DRV SEAGATE

Add Global Spare

Drive ..

Add Global Spare Drive Successful

Rebuild Settings

Press ENT for two seconds to enter the Main Menu. Press ▼ or ▲ to select "View and Edit Config Parms," then press ENT.

Press ▼ or ▲ to select “Disk Array Parameters,” then press ENT.

Press ▼ or ▲ to select “Rebuild Priority Low,” then press ENT. “Low” refers to the temporary setting.

Press ENT again and the abbreviation mark “..” will change to question mark “?”. Press ▼ or ▲ to select priority “Low,” “Normal,” “Improved,” or “High”.

Press ENT to confirm and the question mark “?” will turn into “..”.

View and Edit Config Parms ↕

Disk Array

Parameters..

Rebuild Priority

Low ..

Rebuild Priority

Low?

Rebuild Priority

High..

5-15 Infortrend