Compaq Infortrend manual Logical Volume Assignment

seconds to display the confirm box. Press ENT for two seconds to start initializing the logical volume.

The logical volume has been successfully created.

Press ESC to clear the message. Another message will prompt, press ESC to clear it.

Logical volume information will be displayed below.

Create

Logical Volume ?

Lv=0 Creation Completed

Lv=0 ID=07548332 0024488MB DRV=2

Create Logical Volume Successed

Logical Volume Assignment

If you have two controllers, you may choose to assign this logical volume to

the secondary controller. The assignment can be done during or after the initial configuration.

If the redundant controller function has been enabled, secondary controller IDs assigned to IO channels, the assignment menus should appear as listed on the right.

If settings related to redundant

controllers have not been accomplished, you may find the option after the volume is successfully created.

Press ENT on a configured logical volume. Use arrow keys to select “Logical Volume Assignment..”, and press ENT to proceed. Press ENT for two seconds to confirm.

Press ESC, and the LCD will display the logical volume’s information when

initialization is finished.

Change Logical Volume Params ?

Logical Volume Assignments ..

Red Ctlr Assign
to Sec. Ctlr	?

Logical Volume

Assignment ..

Red Ctlr Assign
to Sec. Ctlr	?

LV=0 ID=685AE502 2021MB DRV=1

Front Panel Operation 5-11