Compaq Infortrend manual Setting the Transfer Width, Host Channel

Host Channel

Move the cursor bar to a channel, then press [ENTER]. Choose “Sync Transfer Clock”, then press [ENTER]. A list of the clock speed will appear. Move the cursor bar to the desired speed and press [ENTER]. A dialog box “Change Sync Transfer Clock?” will appear. Choose Yes to confirm.

IMPORTANT!

•Every time you change the SCSI Transfer Speed, you must reset the controller for the changes to take effect.

Setting the Transfer Width

Move the cursor bar to a channel, then press [ENTER]. Select “Wide Transfer,” then press [ENTER]. A dialog box “Disable Wide Transfer?” or “Enable Wide Transfer?” will appear. Choose Yes to confirm.

IMPORTANT!

•Every time you change the SCSI Transfer Width, you must reset the controller for the changes to take effect.

7-29 Infortrend