MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 52 Mercredi, 11. août 2004 4:48 16

Setting Up Your Machine

SETTINGS

The settings are divided into several categories:

the standard settings define the connection type and frequency to the Internet as well as the transmission type for your documents,

the E-mail sorting defines treatment for all stored E-mail messages received.

Standard settings

Your machine has two types of settings that let you define:

The type and frequency of the connection to your ISP.

SET TIMES

an Internet connection is established every day at

9:00 am, 12:30 am and 5:00 pmA

 

PERIODIC

an Internet connection is established every 3 hours1.

(default value)

 

 

 

 

an Internet connection is established at your request by

ON DEMAND

IMMED. ACCESS (refer to paragraph Internet

 

Connection, page 54).

 

 

A.To avoid Internet access saturation, the automatic connection will occur in reality 12 minutes, give or take, around the requested time.

The type of transmission over the Internet.

IMMEDIATE

document transmission will occur immediately at each

transmission request

 

 

 

DURING

transmissions will only occur at programmed connections

CONNECTIONS

SET TIMES or PERIODIC TYPE

 

 

At any moment you may print the settings of your machine to know their status.

Selecting the connection type

M 941 OK - INTERNET / SETTINGS / CONNEC. TYPE

Select one of the connection options among SET TIMES, PERIODIC or ON DEMAND and press OK to confirm.

Changing the connection period (PERIODIC type)

M 943 OK - INTERNET / SETTINGS / PERIOD

With the PERIODIC mode, enter the new connection period by means of the numerical keypad (between 00:01 am and 11:59 pm) and press OK to confirm.

An Internet connection will be established every three hours (default value).

- 52 -

Date en cours : 11 août 2004

\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX

FR_GB_ESP\Anglais\Configuration.fm

Page 56
Image 56
Xerox F116 Standard settings, Settings, Selecting the connection type, Changing the connection period Periodic type