Xerox F116 From the directory, Choosing The Resolution/Contrast, Dialing, a blank pages

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 66 Mercredi, 11. août 2004 4:48 16

Operation

Caution - If you forget to position the document to be transmitted, the addressee could receive

	a blank pages.
NOTE	: Since the addressee’s number is generally on the document to be transmitted, you may also dial before
	positioning the document.

CHOOSING THE RESOLUTION/CONTRAST

Resolution

You have 4 modes for document transmission.

The mode choice depends on the type of document to be transmitted:

•Normal mode, no icon appears on the display screen. To be used for good quality documents, without drawings or small details,

•Fine mode, symbolised by Fine at the bottom of the display screen. To be used for documents with drawings or small characters,

•Super Fine mode, symbolised by SFine at the bottom of the display screen. To be used for docu- ments with very fine or small character drawings (unless the machine cannot take with it),

•Photo mode symbolised by Photo at the bottom of the display screen. To be used for photogra- phic documents.

To select the resolution mode:

Press key as many times as necessary to select the required mode. A icon on the screen shows the current mode.

Contrast

You can set the contrast if your document is too light or too dark. If the document is light, you must raise the contrast and if it is dark, you must reduce it.

To set the contrast:

Press as many times as necessary to choose the desired contrast, as shown by the position of a cursor.

DIALING

From the directory

Dialing alphabetically

Enter the first letter of your group dial name with the alphanumeric keypad, then add the remaining letters until your group dial name is complete.

- 66 -

Date en cours : 11 août 2004

\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX

FR_GB_ESP\Anglais\Utilisation.fm