Xerox F116 Manual call pick-upwithout off-hooking, Call Monitoring, Stopping A Call In Progress

MFL 251 523 984_ FAXCENTRE F116_F116 L US.book Page 47 Mercredi, 11. août 2004 4:48 16

Setting Up Your Machine

Manual call pick-up without off-hooking

When a line is idle, you can pick up a line on it manually (L1 or L2) by pressing the (loudspeaker) key:

	Press the	key.
	Select the line in question (L1 or L2) using the		and	keys.
	Press the	again to confirm your selection.
NOTE	: If a call is in progress on line L2 (model F116L), only line L1 may be picked up manually. In this
	case, the operation requested is performed without using the menu described above.

CALL MONITORING

If only one call is in progress on line 1 (L1) (model F116) or line 2 (L2) (model F116L), the following is displayed:

L1: called number

TRANS. P1

If 2 calls are in progress, the on-screen display switches back and forward between the following on the display’s 2 lines:

L1: called number

TRANS. P1

and

L2: called number

TRANS. P1

STOPPING A CALL IN PROGRESS

If only one call is in progress on line L1 or line L2 (model F116L):

Press the key.

Confirm the stopping of the call in progress by pressing the key again.

This screen remains displayed for a maximum of 5 seconds.

If 2 calls are in progress on line L1 and line L2:

Press the	key.
Select the line in question (L1 or L2) using the		and	keys.
Press the	key again to confirm.

This screen remains displayed for a maximum of 5 seconds. - 47 -

Safety Maintenance Operation Directory Setting up your Getting started Installation Contents machine

Date en cours : 11 août 2004

\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFL V 2\LU 251 523 984B MFL_V2 FAXCENTRE F116_F116L XEROX

FR_GB_ESP\Anglais\Configuration.fm