Compaq Infortrend manual Snmptrap section

The SNMP_TRAP section

[SNMP_TRAP] – section header

[ENABLED] – 1=enabled, 0=disabled (applies to this section only) [SEVERITY] - level of severity of the messages to be received:

1.notification, 2. warning, 3. alert. “1” covers events of all levels. “3” sends only the most serious events.)

[COMMUNITY] – SNMP community name of the destination/ receiver [RECEIVER] – The IP address of the receiver computer. Add additional lines to specify multiple receivers. Up to 4 receivers can be configured.

The EMAIL section

[EMAIL] – section header

[ENABLED] – 1=enabled, 0=disabled (applies to this section only) [SEVERITY] - level of severity of the messages to be received: notification, 2. warning, 3. alert. “1” covers events of all levels. “3” sends only the most serious events.)

[SUBJECT] – add a topic to email. This can be used to specify the location of the RAID system, if there are many.

[SENDER_MAIL_BOX] – a valid email address to be used as the “from” part of the email message.

[SMTP_SERVER] – SMTP server used to send email. IP address only, do not enter a host name here.

[RECEIVER#] – receiver’s email address. The receiver’s number followed by an “=” mark, an email address, “comma,” and the number to specify the message severity level.

* * * *

The BROADCAST section

[BROADCAST] – section header

[ENABLED] – 1=enabled, 0=disabled (applies to this section only) [SEVERITY] – level of severity of the messages to be received:

1.notification, 2. warning, 3. alert. “1” covers events of all levels. “3” only the most serious events will be broadcast.)

[RECEIVER#] – The IP address of the receiver computer. Add additional lines to specify multiple receivers. Up to 4 receivers can be configured.

3-10 Infortrend