Compaq Infortrend manual Assigning a Name to a Logical Drive, Rebuilding a Logical Drive, 5-18

Assigning a Name to a Logical Drive

Press ENT for two seconds to enter the Main Menu. Press ▼ or ▲ to select "View and Edit Logical Drives..," then press ENT.

Press ▼ or ▲ to select a logical drive, then press ENT.

Press ▼ or ▲ to select “Logical Drive Name," then press ENT.

Press ▼ or ▲ to change the character of the flashing cursor. Press ENT to move the cursor to the next space. The maximum number of characters for a logical drive name is 25.

View and Edit Logical Drives ↕

LG0 RAID5 DRV=3 2012MB GD SB=1

Logical Drive

Name..

Enter LD Name:

_

Rebuilding a Logical Drive

If you want the controller to auto-detect a replacement drive, make sure you have the following items set to enabled:

1.Periodic Drive Check Time

2.Periodic Auto-Detect Failure Drive Swap Check Time

These two configuration options can be found under “View and Edit Configuration Parameters” -> “ Drive-Side SCSI Parameters”.

Press ENT for two seconds to enter the Main Menu. Press ▼ or ▲ to select "View and Edit Logical Drives..", then press ENT.

Press ▼ or ▲ to select the logical drive that has a failed member, then press ENT.

View and Edit Logical Drives ↕

LG0 RAID5 DRV=3 2012MB FL SB=0

Press ▼ or ▲ to select “Rebuild Logical Drive," then press ENT.

Press ENT for two seconds to start rebuilding the logical drive.

The rebuilding progress will be displayed (as a percentage) on the LCD.

Rebuild Logical

Drive ..

Rebuild Logical

Drive?

Rebuilding 25% Please Wait!

Front Panel Operation 5-18