Compaq Infortrend manual When prompted to “Map Host LUN, press ENTER

1.A list of LUN entries and their respective mappings will be displayed. To map a host LUN to a logical volume’s partition, select an available LUN entry (one not mapped yet) by moving the cursor bar to the LUN, then press [ENTER].

2.A list of available logical volumes displays. Move the cursor bar to the desired logical unit, then press [ENTER].

3.A list of available partitions will prompt. Move cursor bar to the desired partition, then press [ENTER]. If you have not partitioned the logical volume, the whole capacity will be displayed as one logical partition.

4.When prompted to “Map Host LUN," press [ENTER]

to proceed. For access control over Fibre network, find in Chapter 8 details about "Create Host Filter Entry."

5.When prompted to "Map Logical Volume?,” select Yes to continue.

A prompt will display the mapping you wish to create. Choose Yes to confirm the LUN mapping you selected.

The detail in the confirm box reads: partition 0 of logical volume 0 will map to LUN 0 of SCSI ID 0 on host channel 0.

Continue to map other partitions to host LUNs.

With any of the Host ID/LUN successfully associated with a logical capacity, the “No Host LUN” message in the LCD screen will change to “Ready.”

If your controller has not been configured with a host channel and assigned with SCSI ID, please move on to section 7.12 Viewing and Editing SCSI Channels.”

7-14 Infortrend