Compaq Infortrend manual Advanced Configuration, Multi-Host Access Control LUN Filtering

Primary and Secondary Controller IDs:	6
Redundant Controller Cache Coherency Channel (RCC Channel):	7
View Channel WWN	7
View Device Port Name List (WWPN)	8
View and Edit Fibre Drive	8
User-Assigned ID (Scan SCSI Drive)	8
View Drive Information	9
View and Edit Host-Side Parameters	9
1. Fibre Channel Connection Type:	10
View and Edit Drive-Side Parameters	10
2. Drive-Side Dual Loop:	10
Controller Unique Identifier	11
Controller Communications over Fibre Loops	12
8.5 Multi-Host Access Control: LUN Filtering	14
Creating LUN Masks	15
WWN Name List	16
Logical Unit to Host LUN Mapping	16
LUN Mask (ID Range) Configuration:	18
Filter Type: Include or Exclude	18
Access Mode: Read Only or Read/Write	19
Sample Configuration:	20
Configuration Procedure:	20
Chapter 9 Advanced Configuration
9.1 Fault Prevention	1
S.M.A.R.T	1
9.1.1 Clone Failing Drive:	2
Replace after Clone:	2
Perpetual Clone:	3
9.1.2 S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology )	5
Configuration Procedure	7
Enabling the S.M.A.R.T. Feature	7
Examining Whether Your Drives Support S.M.A.R.T	7
Using S.M.A.R.T. Functions	8
9.2 Host-side and Drive-side SCSI Parameters	11
Foreword: SCSI Channel, SCSI ID and LUN	11
9.2.1 Host-side SCSI Parameters	11
Maximum Concurrent Host LUN Connection (“Nexus” in SCSI):	11
Number of Tags Reserved for each Host-LUN Connection:	12
Maximum Queued I/O Count:	13
LUNs per Host SCSI ID	13
LUN Applicability:	13
Peripheral Device Type:	14
In-band (SCSI or Fibre):	14
Peripheral Device Type Parameters for Various Operating Systems:	15
Cylinder/Head/Sector Mapping:	16
9.2.2 Drive-side Parameters:	18
SCSI Motor Spin-Up	18
SCSI Reset at Power-Up	19
Disk Access Delay Time	20
SCSI I/O Timeout	20
Maximum Tag Count (Tag Command Queuing)	21
Detection of Drive Hot Swap Followed by Auto Rebuild	22
SAF-TE and S.E.S. Enclosure Monitoring	22
Periodic Drive Check Time	22

ix