Compaq Infortrend manual Index-1

Index

A

Access Mode: Read	8-19
Only or Read/Write
Active-to-Active	10-11, 10-17
Configuration
Active-to-Standby	10-17
Configuration
Adding a SCSI	5-26
Channel’s ID: LCD
Adding a SCSI ID:	7-26
terminal
Adding Drive to a	12-4
Logical Drive
Adding New Drive	12-4
Advanced Firmware	B-2
Features
Assign Spare Drives:	7-7
terminal
Assigning a Logical	5-18
Drive Name: LCD
Assigning Logical Drive	7-17
Name: terminal
Assigning Spare Drive:	5-14
LCD
Assigning Spare Drive:	7-15
terminal
Auto cache flush	B-2
Auto recovery from	B-2
logical drive failure
Auto-Failback	10-11
Automatic engagement	B-7
of replacement
controller
automatic rebuild	1-9
Automatic Shutdown	B-8

B

Background firmware	B-2
download
Bad block auto-	B-7
reassignment
Basic RAID	B-1
Management
Battery Support	10-17
Baud rate	3-1
beeper, mute	5-34, 7-34

C

Cache Dirty	4-7
Percentage: LCD
cache parameters	7-1~2
Cache Status	6-1
Cache Synchronization	10-17
caching parameters	7-1~2
Caching Parameters:	5-1, 5-3~4
LCD
Caching Parameters:	7-1
terminal
Change Password:	5-34
LCD
Change Password:	7-34
terminal
Channel failure	1-14
protection
Channel Mode	B-5
channel mode,	7-25
redefining
Channel Mode: Fibre	8-6
channel mode: viewing	5-25
and redefining
check time, periodic	9-23
auto-detection of failed
drive swap
Choosing Member	5-6
Drives: LCD
Choosing Member	7-6
Drives: terminal
Choosing RAID Level:	7-6
terminal
Clone + Replace,	9-6
S.M.A.R.T.
Clone Failing Drive	9-2, B-8
Co-existing spares	B-1

Index-1