Compaq Infortrend manual View and Edit Configuration Parameters

Navigation Map

A-5

View and Edit

Configuration Parameters ↕

	Modem Status
	..	Baud-rate 38400
	PPP Status	Change to 9600
		19200
	..
		4800
	Com1	2400?
	Configuration ..	Comm Route PPP
	Com2	Change to Dir ?
	Configuration ..	Comm Route Dir
		Change to PPP ?
	PPP Name	Term Emul Enab/Disab
		Change to Disab/Enab?
	..
	PPP Password	Scan/Init Modem	Deconfigure
		Scan/Re-Init Modem	Modem Port	?
	..
		Dial-out Modem
			Configure Modem
		Hang-up Modem
	Modem Functions		on COM1/COM2 ?
		No Modem Port Configured
Communication Status..
	..		Custom ModemInit		Custom Modem
RS-232 Port Configuration..	Modem Setup	Configure Modem Port..	None-DefaultUsed		Init - None/Replace/Append ?
		Modem Operation Modes..
	..		Custom Init Cmd:
PPP Configuration..		Modem Initialization..
			AT ￿
Modem Operation..		Dial-out Functions..
			Dial-out Command		Dial-out Cmd:
SNMP Configuration..				..	ATD￿
	Community Name -	Community Name :	Auto Dial-out
	Not Set	￿	on Init Enabled/Disabled
		Community Name :	Dial-out Timeout
	Trap Destination		￿* seconds	?
		￿
	1 to 4 Parameters ..		Dial-out Retry
		Trap IP Address :	Count - ￿ ?

￿	Retry Interval-
	￿ minutes ..
	Event Condition?
	All Events/Critical&Warning/Critical Events/Disabled

	Write-Back Cache		No Device (0x7f)
Communication Parameters..	Enabled/Disabled ..	Auto ~ 128, 256, 512, 1024	Direct-access(0)
Caching Parameters..			Sequential(1)
Host-side SCSI Parameters..	Optimization for	1, 2, 4, 8, 16, 32	Processor(3)
Drive-side SCSI Parameters..	Random/Sequential I/O ?	1, 2, Def (4), 8, 16, 32, 64	CD-ROM(5)
Disk Array Parameters..			Scanner(6)
Redundant Ctlr Configuration..		1, 2, 4, 8, 16, Def (32), 64, 128, 256	MO Device(7)
			Storage Array(c)
Controller Parameters..
			Unknown (0x1f)
		Device Type -
			Connected, Support Not Connected
		Device Qualifier
	Maximum Queued I/O Count - ***..	Support Removable Media -	Enabled, Disabled
		LUN Application -
	LUNs per Host SCSI ID - **..
			All Undefined LUN, Undefined LUN-0’s
	Num of Host-LUN Connect - **..
	Tag per Host-LUN Connect - **..	Sector Ranges -	Variable, 32, 64, 127, 255
	Peripheral Dev Type Parameters.	Head Ranges -	Variable, 64, 127, 255
	Cyl/Head/Sector Mapping Config..	Cylinder Ranges -
	Fibre Connection Options	Loop Only	Variable, <1024, <32768, <65536 Cylinders
		PtoP Only
		Loop Preferred
		PtoP Preferred