Compaq Infortrend manual SCSI Drive Read/Write Test

SCSI Drive Read/Write Test

From the “View and Edit SCSI Drives” menu, select a new or used drive that the utility is to be performed on; then

press ENT. Select “SCSI Drive Utilities;" then press ENT. Choose “Read/Write Test” and press ENT.

Press▼ or ▲ to select and choose to enable/disable the following options:

1."Auto Reassign Bad Block;

2.Abort When Error Occurs;

3.Drive Test for - Read Only/Read and Write.

When finished with configuration, select "Execute Drive Testing" and press ENT to proceed.

The Read/Write test progress will be indicated as a percentage.

You may press ESC and select "Read/Write Test" later and press ▼ or

▲to select to "View Read/Write Testing Progress" or to "List Current Bad Block Table." If you want to stop testing the drive, select "Abort Drive Testing" and press ENT to proceed.

Drive Read/Write

Test ..

Auto Reassign

Disabled ..

Abort When Error Occur-Enabled

Drive Test for Read and Write..

Execute Drive

Testing ..

Drv Testing 23% Please Wait !

View Read/Write Test Progress ..

List Current

Bad Block Table.

Abort Read/Write

Testing ..

5-41 Infortrend