Compaq Infortrend manual Slot, Chl, Size MB, Speed, Status Global, Vendor, Product ID

6.6SCSI Drive Status

Slot	Slot number of the drive;
	“S” indicates this is the drive used for passing through SES
	signals
Chl	The drive channel where the drive is connected
	X<Y> indicates two channels are configured in a dual-loop
ID	The channel ID assigned to this drive
Size (MB)	Drive capacity
Speed	XxMB Maximum transfer rate of drive channel interface
	Async The drive is using asynchronous mode.
LG_DRV	X	The drive is a drive member of logical drive x.
		If the Status column shows “STAND-BY”, the drive
		is a Local Spare of logical drive x.
Status	Global	The SCSI drive is a Global Spare Drive
	INITING	Processing array initialization
	ON-LINE	The drive is in good condition
	REBUILD	Processing Rebuild
	STAND-BY	Local Spare Drive or Global Spare Drive. The
		Local Spare Drive’s LG_DRV column will show
		the logical drive number. The Global Spare
		Drive’s LG_DRV column will show “Global”.
	NEW DRV	A new drive has not been configured to any
		logical drive or as a spare drive
	USED DRV	An used drive that is not a member of any
		logical drive or configured as spare
	BAD	Failed drive
	ABSENT	Drive does not exist
	MISSING	Drive once existed, but is missing now
	SB-MISS	Spare drive missing
	Vendor and	The vendor and product model information of
	Product ID	the drive
6-6		Infortrend