Compaq Infortrend manual Record of Settings, Array Expansion

	Mapping a Logical Drive/Logical Volume to the Host LUNs	10-24
	Front Panel View of Controller Failure	10-25
	When and how is the failed controller replaced?	10-25
	10.3.2 Via Terminal Emulation	10-26
	Redundant Configuration Using Automatic Setting	10-26
	Redundant Configuration Using Manual Setting	10-28
	Creating Primary and Secondary ID	10-29
	Assigning Logical Drives to the Secondary Controller	10-29
	Mapping a Logical Drive/Logical Volume to the Host LUNs	10-31
	Terminal Interface View of Controller Failure	10-32
	What will happen when one of the controllers fails?	10-32
	10.3.3 When and How Is the Failed Controller Replaced?	10-32
	Forcing Controller Failover for Testing	10-34
	RCC Status (Redundant Controller Communications Channel)	10-35
	Secondary Controller RS-232	10-35
	Remote Redundant Controller	10-35
	Cache Synchronization on Write-Through	10-35
Chapter 11 Record of Settings
11.1 View and Edit Logical Drives		1
	Logical Drive Information	1
	Partition Information	2
11.2	View and Edit Logical Volumes	3
	Logical Volume Information	3
	Partition Information	3
11.3	View and Edit Host LUN’s	4
	LUN Mappings	4
	Host-ID/WWN Name List	4
11.4	View and Edit SCSI Drives	6
11.5	View and Edit SCSI Channels	7
11.6	View and Edit Configuration Parameters	8
	Communication Parameters	8
	PPP Configuration	8
	Caching Parameters	9
	Host Side SCSI Parameters	9
	Drive Side SCSI Parameters	9
	Disk Array Parameters	10
	Redundant Controller Parameters	10
	Controller Parameters	10
11.7	View and Edit Peripheral Devices	11
	Set Peripheral Device Entry	11
	Define Peripheral Device Active Signal	11
	View System Information	11
11.8	Save NVRAM to Disk, Restore from Disk	12
11.9	RAID Security: Password	12
	RAID Security	12
Chapter 12 Array Expansion
12.1	Overview	1
12.2	Mode 1 Expansion:	4
	Adding Drives to a Logical Drive	4
	Add-Drive Procedure	4
12.3	Mode 2 Expansion:	7

xi