Compaq Infortrend manual Upgrading Both Boot Record and Firmware Binaries

Establishing the connection for the RS-232C Terminal Emulation

Please refer to chapter 4, “Connecting to Terminal Emulation,” and also your hardware manual for details on establishing the connection.

Upgrading Both Boot Record and Firmware Binaries

1.From the Main Menu, scroll down to "System Functions."

2.Go to "Controller Maintenance."

3.Choose "Advanced Maintenance."

4.Select "Download Boot Record and Firmware."

5.Set ZMODEM as the file transfer protocol of your terminal emulation software.

6.Send the Boot Record Binary to the controller. In HyperTerminal, go to the "Transfer" menu and choose "Send file." If you are not using Hyper Terminal, choose "Upload" or "Send" (depending on the software).

7.After the Boot Record has been downloaded, send the Firmware Binary to the controller. In HyperTerminal, go to the "Transfer" menu and choose "Send file." If you are not using Hyper Terminal, choose "Upload" or "Send" (depending on the software).

8.When the Firmware completes downloading, the controller will automatically reset itself.

System Functions: Upgrading Firmware C-5