Compaq Infortrend manual Supported Features, Fibre Chip, Multiple Target IDs, 1Gbit Fibre Channel

8.3Supported Features

Fibre Chip

1Gbit Fibre Channel:

Fibre loops (1 Gbit FC-AL) comply with the following standards:

1.(FC-PH) X2.230:1994,

2.(SCSI-FCP) X3.269:1996,

3.(FC-AL-2) Project 1133-D rev.6.5,

4.(SCSI-2) X3.131-1994,

5.Supporting sustained 1 Gigabit/sec (100MB/sec) transfer rates.

6.Each Fibre loop can be independently configured for the connection to host or drive.

2Gbit Fibre Channel:

1.Fibre Channel Arbitrated Loop (FC-AL-2) working draft, rev 6.4

2.Fibre Channel Fabric Loop Attach (FC-FLA) working draft, rev 2.7

3.Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) working draft, rev 2.1

4.Fibre Channel Tape (FC-TAPE) profile, T11/98-124vD, rev 1.13

5.Support Fibre Channel protocol-SCSI (FCP-SCSI)

6.Support Fibre Channel Internet protocol (IP)

Multiple Target IDs:

Each 2Gbit channel configured as a host loop supports multiple target IDs in the range of 0 to 125.

8-4 Infortrend