5.4Creating a Logical Drive

To create a logical drive, press ENT for two seconds to enter the Main Menu. Use or to navigate through the menus. Choose "View and Edit Logical Drives," and then press ENT.

Press or to select a logical drive entry, then press ENT for two seconds to proceed. "LG" is short for Logical Drive.

View and Edit Logical Drives

LG=0

 

Not Defined

?

Choosing a RAID Level:

Press or to choose the desired RAID level, then press ENT for two seconds. "TDRV" (Total Drives) refers to the number of available SCSI drives.

TDRV=4 Create

LG Level=RAID5 ?

Choosing Member Drives:

Press ENT for two seconds, a message, “RAID X selected To Select drives”, will prompt. Confirm your selection by pressing ENT.

Press ENT, then use or to browse through the available drives. Press ENT again to select/deselect the drives. An asterisk (*) mark will appear on the selected drive(s). To deselect a drive, press ENT again on the selected drive. The (*) mark will disappear. "C=1 I=0" refers to "Channel 1, SCSI ID 0".

After all the desired drives have been selected, press ENT for two seconds to continue. Press or to choose “Create Logical Drive,” then press ENT for two seconds to start initializing the logical drive.

RAID X Selected To Select drives

C=1 I=0 1010MB

NEW DRV SEAGATE

Create Logical

Drive?

Logical Drive Preferences:

You may also choose “Change Logical Drive Parameter,” then press ENT to change related parameters before initializing the logical drive.

Change Logical Drive Parameter?

5-6

Infortrend

Page 74
Image 74
Compaq Infortrend manual Creating a Logical Drive, Choosing a RAID Level, Choosing Member Drives, Logical Drive Preferences