Compaq Infortrend manual SCSI Drive Read/Write Test, Terminal Operation, 7-44

SCSI Drive Read/Write Test

From the “View and Edit SCSI Drives” menu, select a new or used drive that the utility is to perform on; then press [ENTER]. Select “SCSI Drive Utilities," then press [ENTER]. Choose “Read/Write Test” and press [ENTER]. You can choose to enable/disable the following options:

1.Auto Reassign Bad Block;

2.Abort When Error Occurs;

3.Drive Test for - Read Only/Read and Write.

When finished with configuration, select "Execute Drive Testing" and press [ENTER] to proceed.

The Read/Write test progress will be indicated by a status bar.

You may press [ESC] and select "Read/Write Test" later and choose either to "View Read/Write Testing Progress" or to "List Current Bad Block Table." If you want to stop testing the drive, select "Abort Drive Testing" and press [ENTER] to proceed.

Terminal Operation 7-44