Technicolor - Thomson TG784 Configuring the Telephony Service, Assign Phone Numbers, Introduction

Models: TG784

1 86
Download 86 pages 24.07 Kb
Page 39
Image 39
5.4Configuring the Telephony Service

5 Telephony

5.4Configuring the Telephony Service

Introduction

If you configured your Thomson Gateway using the Guided Installation, the telephony service will already be configured by the Setup wizard.

If you choose to configure your Thomson Gateway manually or you still need to configure the telephony service, you can follow the procedure below.

Requirements

Your Internet connection must be up and running before you can configure Internet telephony.

Procedure

Proceed as follows:

1Assign Phone Numbers

2Configure the Telephony Service

3Enable the Telephony Service

Assign Phone Numbers

To configure your Internet SIP telephone numbers:

1Browse to the Thomson Gateway Web Interface.

2On the Toolbox menu, click Telephony.

3In the Location bar, click Configure. Assign phone numbers to the ports. If you want to use the same number for all ports, select Port ‘All’.

The phone numbers are provided by your provider.

4Click Apply.

Configure the Telephony Service

Proceed as follows to configure the telephony service:

1Browse to the Thomson Gateway Web Interface.

2On the Toolbox menu, click Telephony.

3In the Location bar, click Expert configure.

4Enter the IP address and the port number of the registrar, and the proxy, as provided by your ISP:

5Click Apply.

Enable the Telephony Service

To enable the telephony service:

1Browse to the Thomson Gateway Web Interface.

2On the Toolbox menu, click Telephony.

E-DOC-CTC-20080421-0010 v1.0

33

 

Page 39
Image 39
Technicolor - Thomson TG784 manual Configuring the Telephony Service, Assign Phone Numbers, Configure the Telephony Service