5 Telephony

5.2Installing the Thomson DECT USB Adapter

Introduction

If your package contains a Thomson DECT USB Adapter, you can use this Thomson DECT USB Adapter to turn your Thomson Gateway into a DECT base station. The only thing you need to do is plug in your Thomson DECT USB Adapter and register your DECT phones.

Procedure

Proceed as follows:

1Connect the flexicable to the Thomson DECT USB Adapter:

2Plug the Thomson DECT USB Adapter in the USB master port.

3On of the red LEDs on the Thomson DECT USB Adapter start blinking. As long as this LED is blinking you will be able to register your DECT phone.

4Register your DECT phone You can now connect your DECT phone(s) to the Thomson Gateway base station. For more information, see “5.3 Connecting a DECT Phone to Your Thomson Gateway”.

E-DOC-CTC-20080421-0010 v1.0

31

 

Page 37
Image 37
Technicolor - Thomson TG784 manual Installing the Thomson Dect USB Adapter, Introduction