Technicolor - Thomson TG784 manual Adding IGD Discovery and Control

6 Getting the Most Out of Your Thomson Gateway

Adding IGD Discovery and Control

Your Windows XP system is able to discover and control Internet Gateway Devices (IGD), like the Thomson Gateway on your local network. Therefore, it is recommended to add the IGD Discovery and Control client to your system.

Proceed as follows:

1On the Windows taskbar, click Start.

2Select (Settings >) Control Panel > Add or Remove Programs.

3In the Add or Remove Programs window, click Add/Remove Windows Components.

4The Windows Components Wizard appears:

Select Networking Services in the Components list and click Details.

5The Networking Services window appears:

Select Internet Gateway Device Discovery and Control Client and click OK.

6Click Next to start the installation and follow the instructions in the Windows Components Wizard.

7At the end of the procedure, the Wizard informs you that the installation was successful. Click Finish to quit.

58 E-DOC-CTC-20080421-0010 v1.0