Advanced Menu, Rear Projection, Reset | BOXLIGHT XD-10m instruction

Advanced Menu

To access the Advanced menu settings, press the menu/select but- ton to display the Main menu, press the down arrow to highlight Advanced, then press menu/select again to access the Advanced menu.

FIGURE 18

Advanced menu

Rear Projection

When you turn Rear Projection on, the projector reverses the image so you can project from behind a translucent screen. Highlight Rear Projection, press menu/select, then press the up or down arrow buttons to turn this feature off and on.

Reset

Highlight Reset then press menu/select to reset the options in the menus (except Language, Video Standard, and Rear Projection) to their original settings.

23

Image 31

BOXLIGHT XD-10m manual Advanced Menu, Rear Projection, Reset

Contents

Page FCC Warning Canada Safety CertificationsEN 55022 Warning Trademarks Declaration of ConformityPage Table of Contents Index Appendix Safety Definitions Safety Symbols Safety InstructionsSafety Terms Important Operating Considerations Customer Service Unpacking the Projector Image ResolutionIntroduction Compatibility T r o d u c t i o n Usage Guidelines If You Need Assistance Warranty Make sure the projector and the computer are turned off Setting UP the Projector T t i n g O j e c t o r Connecting a Computer Connecting a Video Player Turning Off the Projector Powering up the Projector and Adjusting the Image T t i n g O j e c t o r Basic Image Adjustment Using the ProjectorAdjusting the Projector I n g O j e c t o r Using the Remote Control Menu/select Using the Keypad and Remote ButtonsSource keypad only or Data and Video remote only Up/down arrow buttons Reset keypad onlyKeystone + remote only Forward/back buttons remote only Using the On-Screen Menus Keystone Display MenuBrightness Blank screen ContrastTint Color Resize Image Menu for Computer SourcesAuto Image Vertical Position Manual SyncManual Tracking Horizontal Position Video Standard video sources only Image Menu for Video Sources Control Menu Default SourceAuto Source Advanced Menu ResetRear Projection Language Menu Source Computer resolutionStatus Menu Lamp hours used I n g O j e c t o r Cleaning the Lens Maintenance & TroubleshootingReplacing the Projection Lamp Pull the yellow tab on the lamp module Loosen the captive screw on the lamp module I n t e n a n c e Troubleshooting Using the Security Lock Replacing the Batteries in the Remote Control Problem Only the start-up screen displays Troubleshooting Problem The projector is not running Problem Image is too wide or narrow for screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screen Call Boxlight at 1-800-762-5757 or Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts off Appendix Specifications Standard Accessories ship with the projector Accessories Optional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation Chart FN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook Computer Image Width Projected Image SizeDistance to screen Diagonal Maximum Minimum Index D e Page D e Limited Warranty Limitation of Liability