U s i n g | t h e | P r o j e c t o r |
|
|
|
NOTE: The Manual Sync, Manual Tracking, Horizontal Position and Vertical Position options are available only for analog computer sources. The projector sets these options automatically for digital computer and video sources, with no manual override.
20
Manual Sync
The projector adjusts signal synchronization automatically for most computers. But if the projected computer image looks fuzzy or streaked, try turning Auto image off then back on again. If the image still looks bad, try adjusting the signal synchronization manually:
1Turn Auto Image off.
2Highlight Manual sync, press menu/select, use the arrow but- tons to adjust Manual sync until the image is sharp and free of streaks, then press menu/select.
Manual Tracking
The projector adjusts tracking automatically to match the video signal from your computer. However, if the display shows evenly spaced, fuzzy, vertical lines or if the projected image is too wide or too narrow for the screen, try turning Auto Image off then back on again. If the image is still bad, try adjusting the tracking man- ually:
1Turn Auto image off.
2Highlight Manual tracking, press menu/select, use the arrow buttons to adjust Manual tracking until the fuzzy vertical bars are gone, then press menu/select.
Horizontal Position
Follow these steps to manually adjust the horizontal position:
1Turn Auto image off.
2Highlight Horizontal position, press menu/select, use the arrow buttons to adjust the Horizontal position, then press menu/select.
Positioning adjustments are saved when you turn off the projec- tor.
Vertical Position
Follow these steps to manually adjust the vertical position.
1Turn Auto image off.
2Highlight Vertical position, press menu/select, use the arrow buttons to adjust the Vertical position, then press menu/select.
Positioning adjustments are saved when you turn off the projec- tor.
