BOXLIGHT XD-10m manual Using the Keypad and Remote Buttons, Menu/select

U s i n g t h e P r o j e c t o r

Using the Keypad and Remote Buttons

While the menus are displayed, the source and reset buttons on the keypad and the up and down arrow buttons on the remote act as menu navigation and adjustment buttons and the menu/select button acts as a select button. See “Using the On- Screen Menus” on page 16 for details.

LED

menu/select

menu/select

forward

source

back

data

keystonevideo

reset

NOTE: If you have turned Auto Source off (page 22), you may need to press the source button more than once to display an active source. The sources switch in this order: data analog, data digital, S-video, and composite video.

FIGURE 11

Keypad and remote buttons

Menu/select

Press the menu/select button to open the on-screen menus. Press menu/select again (while Exit is highlighted) to close the menus. (The menus automatically close after 30 seconds if no buttons are pressed.) When you close the menus, the projector saves any changes you made. For more information about the on-screen menus, see page 16.

Source (keypad only) or Data and Video (remote only)

When you have more than one source (computer and video) con- nected to the projector, select between them by pressing the source button on the keypad or the data or video button on the remote.

14