Reset keypad only, Keystone + remote only | BOXLIGHT XD-10m specs

Reset (keypad only)

Resets the options in the menus (except Language, Video Stan- dard, and Rear Projection) to their original settings.

Keystone + - (remote only)

Use this feature to adjust the image vertically and make a more square image.

1Press the keystone + button to reduce the upper part of the image, and press the keystone - button to reduce the lower part. You can also adjust keystone from the Display menu (see page 17 for details on the menu).

increasing keystone		decreasing keystone

FIGURE 12

Adjusting the keystone

Forward/back buttons (remote only)

These buttons act like the page up and page down buttons on your computer’s keyboard. You can use them to advance through a slide show in PowerPoint™ presentations. To use this feature, you must connect the USB mouse connector on the computer cable to your computer. See page 7 for details.

Up/down arrow buttons

Use these buttons to navigate through and make adjustments to the on-screen menus. See “Using the On-Screen Menus” on page 16 for details.

15

Image 23

BOXLIGHT XD-10m manual Reset keypad only, Keystone + remote only, Forward/back buttons remote only, Up/down arrow buttons

Contents

Page EN 55022 Warning Safety CertificationsFCC Warning Canada Trademarks Declaration of ConformityPage Table of Contents Index Appendix Safety Terms Safety InstructionsSafety Definitions Safety Symbols Important Operating Considerations Customer Service Unpacking the Projector Image ResolutionIntroduction Compatibility T r o d u c t i o n Usage Guidelines If You Need Assistance Warranty Make sure the projector and the computer are turned off Setting UP the Projector T t i n g O j e c t o r Connecting a Computer Connecting a Video Player Turning Off the Projector Powering up the Projector and Adjusting the Image T t i n g O j e c t o r Adjusting the Projector Using the ProjectorBasic Image Adjustment I n g O j e c t o r Using the Remote Control Source keypad only or Data and Video remote only Using the Keypad and Remote ButtonsMenu/select Up/down arrow buttons Reset keypad onlyKeystone + remote only Forward/back buttons remote only Using the On-Screen Menus Brightness Display MenuKeystone Blank screen ContrastTint Color Auto Image Image Menu for Computer SourcesResize Vertical Position Manual SyncManual Tracking Horizontal Position Video Standard video sources only Image Menu for Video Sources Auto Source Default SourceControl Menu Rear Projection ResetAdvanced Menu Language Menu Source Computer resolutionStatus Menu Lamp hours used I n g O j e c t o r Replacing the Projection Lamp Maintenance & TroubleshootingCleaning the Lens Pull the yellow tab on the lamp module Loosen the captive screw on the lamp module I n t e n a n c e Troubleshooting Using the Security Lock Replacing the Batteries in the Remote Control Problem Only the start-up screen displays Troubleshooting Problem The projector is not running Problem Image is too wide or narrow for screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screen Call Boxlight at 1-800-762-5757 or Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts off Appendix Specifications Standard Accessories ship with the projector Accessories Optional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation Chart FN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook Computer Image Width Projected Image SizeDistance to screen Diagonal Maximum Minimum Index D e Page D e Limited Warranty Limitation of Liability