Extron electronic MVX PLUS 128 20 - Global Presets page, Saving a preset, Recalling a preset

Global Presets page

You can save and recall global presets from the Global presets page (figure 6-20). Access the Global presets page by clicking the Global Presets link on the left of the Control page.

Select Set & View Ties.

Select RGB & Audio Settings.

Refresh.

Figure 6-20 — Global Presets page

Saving a preset

Save the current configuration (configuration 0) as a preset as follows:

1.	Click the Save Preset button.
2.	Select the desired preset by clicking on one of the presets listed. To create a
	new preset, click one of the [unassigned] buttons. Overwrite an existing preset
	by clicking an already existing preset.
3.	If desired, type over the current name in the box adjacent to the Save Preset
	button.

NPreset names are limited to 12 upper and lower case alphanumeric characters and the {space} _ : = and / characters.

NThe following characters are invalid in preset names: + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

If you do not rename an unassigned button, the MVX 128 switcher names the preset as Preset {next available number}.

If you do not rename an existing preset when it is overwritten, the MVX 128 switcher retains the same name.

4. Click the Accept button.

Recalling a preset

To recall a global preset to be the current configuration, click the button associated with the desired preset.

MVX Plus 128 VGA Matrix Switchers • HTML Operation 6-19