Extron electronic MVX PLUS 128 manual Command/response table for SIS commands continued

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
View ties, gain, volume, mutes, presets, and DSVP
View RGBHV output tie	X#&	X@]
Example:	15&	27]	Input 27 RGBHV is tied to
			output 15.
View video output tie	X#%	X@]
Example:	7%	02]	Input 2 video is tied to output 7.
View audio output tie	X#$	X@]
Example:	3$	06]	Input 6 audio is tied to output 3.
View input gain	X@G	X$]
Example:	4G	-02]	Gain for input 4 is -2 dB.
View output volume	X@V	X&]
Example:	7V	55]	Volume for output 7 is 55%.
View output mutes	EVM}	X1$1, X1$2, ... X1$8Mut]	Each X1$ response is the
			mute status of an output,
			starting from output 1.
Example:	EVM}	02301000Mut]	Output 2 audio is muted,
			output 3 video and audio are
			muted, and output 5 video is
			muted. All other outputs are
			unmuted.
View video global preset	EX1!*1*1VC}	X@1•X@2•...•X@16•Vid]	Show preset X1!’s video
configuration			configuration. Show the
			input tied to 16 sequential
			outputs (12 are present on
			this model), starting from
			output 1.

Command description:	preset #*starting output # (O# - should always be 1)*1(=video)VC
Response description:	input # (I#) tied to O#1•I# tied to O#2•I# tied to O#3• ... •I# tied to O#12•Vid]
			input 8 tied to output 4
Example:	input 12 tied to output 3							no tied input				outputs do not exist
	Response = tied input: 08•08•12•08•08•11•00•00•--•--•--•--•--•--•--•--•Vid
	Output:	1		2	3	4	5		6	7	8	09	10	11	12	13	14	15	16

View audio global preset configuration

Command description: Response description:

Example:

Each position shown in the response is an output: left = output 1, right = output 16. (Outputs 9 through 16 are not present on the MVX Plus 128.) The number in each position is the input tied to that output.

In this example, video input 8 is tied to outputs 1, 2, 4, and 5; input 12 is tied to output 3; and input 11 is tied to output 6. No inputs are tied to outputs 7 and 8.

EX1!*1*2VC} X@1•X@2•...•X@16•Aud] Show preset X1!’s audio configuration. Show the input tied to 16 sequential outputs (12 are present on this model), starting from output 1.

preset #*starting output # (O# - should always be 1)*2(=audio)VC

input # (I#) tied to O#1•I# tied to O#2•I# tied to O#3• ... •I# tied to O#12•Aud]

input 1 tied to output 3 no tied input outputs do not exist

Response = tied input: 01•01•01•01•02•12•12•00•--•--•--•--•--•--•--•--•Aud

Output: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

Each position shown in the response is an output: left = output 1, right = output 16. (Outputs 9 through 16 are not present on the MVX Plus 128.) The number in each position is the input tied to that output.

In this example, audio input 1 is tied to outputs 1, 2, 3, and 4; input 2 is tied to output 5, input 12 is tied to outputs 6 and 7. No input is tied to output 8.

MVX Plus 128 VGA Matrix Switchers • Programmer’s Guide 4-13