Extron electronic MVX PLUS 128 manual Example 5 Grouping inputs and outputs

Example 5: Grouping inputs and outputs

In the following an example, several switcher inputs and outputs are assigned to groups. The steps show the front panel indications that result from your action.

1. Press and release the Esc button (figure 3-28).

Press the Esc button to clear all selections.

	C O N T R O L
ENTER	PRESET	VIEW	ESC

The button flashes once.

Figure 3-28 — Clear all selections

2. To enter I/O Group mode, press and hold the Input 1 and Output 1 buttons for approximately 2 seconds and then release the buttons (figure 3-29).

Press and hold the Input 1 button and Output 1 button.

Release the Input 1 button and Output 1 button.

1	2
		2 seconds
1	2	Ungrouped input and
		output buttons light.

Figure 3-29 — Select I/O Group mode

1 1

3. Press and release the Enter button to select group 1 (figure 3-30).

Press and release the Enter button to select group 1.

The button lights amber to indicate the selection.

C O N T R O L

ENTER PRESET VIEW ESC

Group # 1 2 3 4

Figure 3-30 — Select an I/O group

4. Press and release the input 1 through 4 and output 1 through 4 buttons (figure 3-31).

Press and release the Input 1 through Input 4 buttons.

The selected buttons light.

					INPUTS
1	2	3	4	5	6	7	8

Press and release the Output 1 through Output 4 buttons.

The selected buttons light.

1	2	3	4	5	6	7	8
			OUTPUTS

Figure 3-31 — Assign inputs and outputs

MVX Plus 128 VGA Matrix Switchers • Operation 3-19