Extron electronic MVX PLUS 128 manual Quick Start MVX Plus 128 VGA Matrix Switchers, continued

Quick Start —

MVX Plus 128 VGA Matrix Switchers, continued

Esc button cancels selections in progress and resets the front panel button indications. The Esc button does not reset: the current configuration, the RGBHV and audio selection, any presets, or any audio level or volume settings. On audio models, Esc increments the level and volume. See Viewing and adjusting the audio level in the next column.

RGBHV and Audio buttons select/deselect video and/or audio. The Audio button blinks to indicate audio breakaway. The Audio button also selects the audio level/adjust mode. See Viewing and adjusting the audio level in the next column.

Create a tie

1. Press and release the RGBHV/Video and/or Audio I/O button(s) to select or deselect video and/or audio as desired.

I / O

RGBHV AUDIO

Green when selected. Red when selected.

Off when deselected. Off when deselected.

2. Press and release the desired input button.

The button lights to indicate the selection.

5

3. Press and release the desired output button(s).

Amber indicates RGBHV/video and audio tie.

Green indicates RGBHV/video only tie.

Red indicates audio only tie.

3 4 8 ENTER

Green indicates the need to confirm the change.

4. Press and release the Enter button.

Saing or recalling a preset

1. Save a preset — Press and hold the Preset button for 2 seconds.

Recall a preset — Press and release the Preset button.

Save a	2 seconds	PRESET
preset	PRESET
	Press and hold.	Preset button blinks.
Recall a	PRESET	PRESET
preset
	Press and release.	Preset button lights.

All input and output buttons with assigned presets light red.

The configuration data at assigned preset locations will be overwritten.

					INPUTS
1	2	3	4	5	6

2. Press and release the desired input or output button.

The button blinks red to indicate that this preset is selected to save or recall.

1	ENTER	The Enter button blinks
		green to indicate the need
		to activate the save or recall.

3. Press and release the Enter button.

Viewing and adjusting the audio level

1. Press and hold the Audio button.

2 seconds
AUDIO	AUDIO
Press and	Audio button blinks.
Hold

2. Press an input or output button. See chapter 3 to read the displayed value.

5	Press an Input button to adjust gain/attenuation.
	Press an Output button to adjust volume.
		Output buttons display gain/attenuation.
1	2
		Input buttons display volume.

3. Increase and decrease the gain/attenuation or volume level by pressing the Esc (>) and View (<) buttons.

4. Press and release the Audio button to exit.

button decreases button increases the level or volume. the level or volume.

VIEW ESC

QS-2 MVX Plus 128 VGA Matrix Switchers • Quick Start