5.

Press and release the Audio button (figure 3-58).

 

 

 

Press the Audio button

 

 

 

to exit audio mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I / O

 

 

 

 

 

 

 

 

 

 

 

All input buttons and output buttons

 

 

 

RGBHV

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

return to unlit or background illumination.

 

 

 

 

 

 

 

 

 

The Audio button stops blinking and lights red.

The RGBHV button lights green.

Figure 3-58 — Deselect Audio mode

Viewing and adjusting the output volume

On models with audio, the audio level of each output can be displayed and adjusted through a range of 100% (no attenuation) to 0% (maximum [98 dB] attenuation). The audio level can be adjusted from the front panel or under RS-232/RS-422 or Ethernet control.

1.

Press the Esc button to clear any input buttons, output buttons, or control

 

buttons that may be lit.

2.

To enter Audio mode, press and hold the Audio button until the button begins

 

to blink red, then release the button.

3.

Press and release an output button to select an output. The input buttons

 

display the volume level for the selected output. As a general rule, the more

 

buttons that are lit, the higher the volume. The fewer buttons that are lit, the

 

lower the volume.

 

For a more detailed analysis of decoding the displayed value, see Reading the

 

displayed volume on the next page.

4.

Press and release the Esc (>) and View (<) buttons to increase and decrease

 

the audio volume.

5.

Press and release the Audio button to save the audio settings and exit the

 

Audio mode. The Audio button stops blinking.

N• There is one audio volume level setting per output. The audio level setting is shared by the left and right audio inputs.

The audio volume levels are stored in non-volatile memory. When power is removed and restored, the audio level settings are retained.

Exiting Audio mode by pressing the Audio button always returns the I/O buttons to RGBHV lit green and Audio lit red.

Pressing the Enter or Preset button also exits Audio mode. Pressing the Preset button changes to Recall Preset mode.

MVX Plus 128 VGA Matrix Switchers • Operation 3-33

Page 55
Image 55
Extron electronic MVX PLUS 128 manual Viewing and adjusting the output volume, Press and release the Audio button figure