Extron electronic MVX PLUS 128 manual Preferences menu, Ties shown as lines

Name presets — Allows you to assign a name to each of the 32 memory presets.

NPreset names are limited to 12 upper- and lower-case alphanumeric characters, space, and the _ : = and / characters.

NThe following characters are invalid in preset names: + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Show RS-232 strings — Displays the ASCII commands that are used by the current configuration. You can refer to these for RS-232 programming.

I/O group settings — Allows you to establish I/O groups.

Room configuration — Allows you to assign outputs to rooms or delete outputs from rooms.

NA Room is a subset of outputs that are logically related to each other, as determined by the operator. The MVX Plus 128 switcher supports up to 10 rooms, each of which can consist of from 1 to 16 outputs.

Initialize — Initializes and clears any or all of the following: ties, presets, audio configuration, preset names, icon names, and icons.

Preferences menu

Immediate changes — Causes configuration changes to take effect immediately.

Hold/verify changes — Delays implementation of configuration changes until the Changes – Take button is pressed.

Ties as lines — Displays ties as lines (figure 5-10).

Figure 5-10 — Ties shown as lines

MVX Plus 128 VGA Matrix Switchers • Matrix Software 5-17