Matrix Software, cont’d

Uploading HTML files

You can create customized HTML pages for the switcher to display. The HTML Files List window (figure 5-8) provides a way to view the contents of the switcher’s file system and to upload custom HTML pages to the switcher.

Figure 5-8 HTML Files List window

Upload HTML pages as follows:

NThe files listed in figure 5-8 are shown for example only and may not be present on your switcher.

NThe HTML Files List window is for inserting your own HTML pages. This is not the window to replace the firmware that controls all switcher operation. See Updating firmware, earlier in this chapter, to replace the firmware.

NThe following characters are invalid in file names: {space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

1.

Connect the PC to the MVX Plus 128 switcher via the switcher’s

 

RS-232/RS-422 port or Ethernet port.

2.

Start the Matrix Switcher+ Control Program and connect to the MVX Plus 128

 

switcher. See Using the software in this chapter, steps 1 through 4, starting on

 

page 5-3.

3.

Click on Tools > HTML File Manager.

4.

Click the Pick File(s) to Load to Server button. An open file window appears.

5.

Navigate to the folder where you saved the HTML file(s). Select the file(s).

NTo select multiple files, hold the Ctrl key while you select the desired files.

NIf you want one of the HTML files that you created to be the default start-up page, name the file “index.html”. The MVX Plus 128 switcher looks for that file name when you first connect to it using an Internet browser.

6.

Click the Open button. The file(s) upload to the MVX Plus 128 switcher may

 

take a few minutes.

7.

Click the Update button to confirm the upload.

8.

Click the Close button to exit the HTML Files List window.

5-14 MVX Plus 128 VGA Matrix Switchers • Matrix Software

Page 102
Image 102
Extron electronic MVX PLUS 128 manual Uploading Html files