Extron electronic MVX PLUS 128 manual 9 10, Operation, cont’d, 35 - Select RGB Delay mode

Operation, cont’d

2. Press and hold the RGBHV button for approximately 2 seconds (figure 3-35).

RGBHV

2 seconds

RGBHV

Press and hold the RGBHV button until it blinks.

= Blinking button

Figure 3-35 — Select RGB Delay mode

3. Press and release the output 17 button (figure 3-36).

The Input 1 through Input 10 buttons display the selected output's RGB delay. Each lit input button indicates half a second of delay.

In this example, the green input buttons display 3.5 seconds of RGB delay.

0.5 1.0 1.5 2.0 2.5 3.0 3.5

Press and release the
Output 1 button.	1	2
The button lights green.

INPUTS

1 2 3 4 5 6 7 8 9 10 1

= Unlit button

= Lit button

Figure 3-36 — Select an output

4. Press and release the Esc (>) button once (figure 3-37) to increase the RGB delay by a half second.

Press and release the Esc (>) button twice more to increase the RGB delay by a whole second. Note the input button indication changes that occur each time the Esc (>) button is pressed and released.

Figure 3-37 show the result of pressing the Esc (>) button a total of three times.

Press the Esc button to increase the RGB interval that is applied to switches to the selected output by a half second per button push.

ESC

ESC

0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0

INPUTS

ESC 1 2 3 4 5 6 7 8 9 10 1

The Input 1 through Input 10 buttons display the selected output's RGB delay. Each lit input button indicates half a second of delay.

In this example, the green input buttons display 5.0 seconds of RGB interval.

= Unlit button

= Lit button

Figure 3-37 — Adjust the RGB delay interval

3-22 MVX Plus 128 VGA Matrix Switchers • Operation