Extron electronic MVX PLUS 128 manual SIS Programming and Control, cont’d, Executive mode, Resets

SIS™ Programming and Control, cont’d

Command/response table for SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description

Save, recall, and directly write presets (continued)

Directly write a room preset E+X**X1@PX@*X#!X@*X#%X@*X#$ ... X@*X#&}

RmmX*•SprX1@]

Example:Esc+7*3P12*7&11*5$4*5%6*6!

Rmm07•Spr03]

Enter as many ties as are valid for this model. Tie all (!), tie RGBHV (&), tie video (%), and tie audio ($) commands are all valid.

Brackets are shown to separate ties for clarity only. Create preset 3 for room 7, which ties audio input 12 to output 7, video input 11 to output 5, RGBHV input 4 to output 5, and video and audio input 6 to output 6.

Executive mode

Lock front panel	1X	Exe1]	Enable executive mode.
Unlock front panel	0X	Exe0]	Disable executive mode.
View lock status	X	X(]
Resets
Reset global presets and names	EZG}	Zpg]	Clear all global presets and
			their names.
Reset one global preset	EX1!ZG}	ZpgX1!]	Clear global preset X1!.
Reset RGB delays	EZD}	Zpd]	Reset all RGB delays to 0.0
			seconds.
Reset audio input levels	EZA}	Zpa]	Rest all audio input levels
			(gain and attenuation) to 0 dB.
Rest audio output levels	EZV}	Zpv]	Reset all audio output
			levels (volume) to 100% (no
			attenuation).
Reset all mutes	EZZ}	Zpz]	Reset all video and audio
			mutes.
Reset room map	EZR}	Zpr]	Clear all room presets.
Reset individual room	EX*ZR}	ZprX*]	Clear all presets for room X*.
Reset individual room preset	EX**X1@ZP}	ZppX**X1@]	Clear an individual room
			preset and name.
Reset flash	EZFFF}	Zpf]	Reset flash memory (erase all
			user-supplied files).
Reset whole switcher	EZXXX}	Zpx]	Clear all ties and presets,
			reset all audio gains to 0 dB,
			and reset volume to 100%.
Absolute reset	EZQQQ}	Zpq]	Similar to Reset whole
			switcher, plus clear the IP
			address to 192.168.254.254
			and subnet mask to
			255.255.000.000.

4-12 MVX Plus 128 VGA Matrix Switchers • Programmer’s Guide