Extron electronic MVX PLUS 128 manual File Management Page, 9 - File Management page

2.	Run the executable (*.exe) file to decompress the firmware file.
3.	Connect the PC to the MVX 128 switcher via the switcher’s Ethernet port.
4.	Access the MVX 128 switcher using HTML pages.
5.	Click the Configuration tab.
6.	Click the Firmware Upgrade link.
7.	Click the Browse button. An open file window appears.
8.	Navigate to the folder where you saved the firmware upgrade file. Select the
	file.

NValid firmware files must have the file extension “.S19”. Any other file extension is not a firmware upgrade.

NThe original factory-installed firmware is permanently available on the MVX 128 switcher. If the attempted firmware upload fails for any reason, the switcher automatically reverts to the factory-installed firmware.

9. Click the Open button.

10. Click the Upload button. The firmware upload to the MVX 128 switcher may take a few minutes.

File Management Page

To delete files such as HTML pages from the switcher or to upload your own files to the switcher, click the File Management tab. The switcher downloads the file management HTML page (figure 6-9).

Refresh.

Figure 6-9 — File Management page

NThe files listed in figure 6-9 are shown for example only and may not be present on your switcher.

To delete a file, check the associated delete check box and click the Delete Files button.

MVX Plus 128 VGA Matrix Switchers • HTML Operation 6-11