Extron electronic MVX PLUS 128 manual Command/response table for IP SIS commands, EX4! CR

Command/response table for IP SIS commands

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
IP setup commands

Set matrix name	EX3)CN}
Read matrix name (location	ECN}
Reset matrix name to	E•CN}
factory default
Set time and date	EX3@CT}
Read time and date	ECT}
Set GMT offset	EX3$CZ}

Ipn•X3)]

X3)]

Ipn•X3)]

IptX3@]

X3#]

IpzX3$] In the command, the divider between hours and minutes can be either a colon or a period. In the response, the divider is a colon.

Example:

Set Daylight Savings Time Read Daylight Savings Time Set IP address

Read IP address

Read hardware address Read # of open connections Set subnet mask

Read subnet mask

Set gateway IP address Read gateway IP address Set administrator password Read administrator password

Reset (clear) administrator password

Set user password Read user password Reset (clear) user password Set mail server, domainname

Read mail server, domainname

Set e-mail recipient

E8.0CZ}	Ipz+08:00]
EX3%CX}	X3%]
ECX}	X3%]
EX3^CI}	IpiX3^]
ECI}	X3^]
ECH}	X3&]
ECC}	X3*]
EX3^CS}	IpsX3^]
ECS}	X3^]
EX3^CG}	IpgX3^]
ECG}	X3^]
EX3(CA}	Ipa•X3(]
ECA}	X3(]
E•CA}	Ipa•]
EX3(CU}	Ipu•X3(]
ECU}	X3(]
E•CU}	Ipu•]
EX3^,X4),X3(CM}	IpmX3^,X4),X3(]
ECM}	X3^,X4),X3(]
EX4!,X4@CR}	IprX4!,X4@,]	This command sets the
		recipient. To receive e-mail
		notifications, you must then
		set the events that the switcher
		reports, using one or more
		separate Set e-mail events (EM)
		commands (see next page).

Example:	E72,Jsmith@folklore.netCR}
		Ipr72,Jsmith@folklore.net,]
Read e-mail recipient	EX4!CR}	X4@,]

MVX Plus 128 VGA Matrix Switchers • Programmer’s Guide 4-17