Extron electronic MVX PLUS 128 Changing the input gain and attenuation, Click the desired input

HTML Operation, cont’d

Changing the input gain and attenuation

Users can set each input’s level of audio gain or attenuation (-18 dB to +24 dB) from the RGB and Audio Settings page. Audio levels can be adjusted so there are no noticeable volume differences between sources.

Change an input’s audio level setting as follows:

1. Click the Input drop box. A drop-down scroll box appears (figure 6-12).

Figure 6-12 — Input selection drop box

2.	Click and drag the slider or click on the scroll up button or the scroll down
	button until the desired input is visible.
3.	Click the desired input.
4.	Click the Input Audio Level (dB) drop box. A drop-down scroll box appears
	(figure 6-13).

Figure 6-13 — Gain drop box

5.	Click and drag the slider or click on the scroll up button or scroll down
	button until the desired input is visible.
6.	Click the desired gain or attenuation value.

6-14 MVX Plus 128 VGA Matrix Switchers • HTML Operation