Operation, cont’d

d

e

Select 9600 baud for the RS-232/RS-422 port in Serial Port Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-40.

Indicate that the RS-232/RS-422 port is set to 9600 baud in Serial Port Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-40.

Preset button — The Preset button has two primary functions (•) and five secondary () functions:

Activates Save Preset mode to save a configuration as a preset and Recall Preset mode to activate a previously-defined preset.

Blinks when Save Preset mode is active and lights steadily when Recall Preset mode is active.

In the I/O Group mode, select group 2. See I/O grouping on page 3-17.

In the I/O Group mode, indicate that group 2 is selected. See I/O grouping on page 3-17.

With the Enter, View, and Esc buttons, select Serial Port Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-40.

Select 19200 baud for the RS-232/RS-422 port in Serial Port Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-40.

Indicate that the RS-232/RS-422 port is set to 19200 baud in Serial Port Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-40.

View (<) button — The View (<) button has two primary functions (•) and eight secondary () functions:

Select View-Onlymode that displays the current configuration.

NView-only mode also provides a way to mute and unmute the outputs. See Muting and unmuting video and/or audio outputs on page 3-26.

Indicate that View-Onlymode is active.

In the I/O Group mode, select group 3. See I/O grouping on page 3-17.

In the I/O Group mode, indicate that group 3 is selected. See I/O grouping on page 3-17.

Decrease the RGB delay of switches to the selected output. See Setting RGB delay on page 3-21.

Decrease the audio level of the selected input. See Viewing and adjusting the input audio level on page 3-29.

Decrease the volume of the selected output. See Viewing and adjusting the output volume on page 3-33.

With the Enter, Preset, and Esc buttons, select Serial Port Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-40.

Select 38400 baud for the RS-232/RS-422 port in Serial Port Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-40.

Indicate that the RS-232/RS-422 port is set to 38400 baud in Serial Port Configuration mode. See Selecting the RS-232/RS-422 protocol and baud rate on page 3-40.

3-4 MVX Plus 128 VGA Matrix Switchers • Operation

Page 26
Image 26
Extron electronic MVX PLUS 128 manual Operation, cont’d