M a i n t e n a n c e | & | T r o u b l e s h o o t i n g |
|
|
|
7Install the new lamp module.
8Tighten the screw on the outside of the module.
9Press the yellow tab to reconnect the lamp module.
10Replace the lamp access grill by lining up the ribs on the grill with the marks on the bottom case and sliding the grill in the direction of the arrows on the bottom case.
11Plug in the power cord and press the Power switch to turn the projector back on.
12To reset the lamp hour counter in the Status menu, press and hold the reset button, then press the menu/select button (while still holding down the reset button) for 10 seconds.
Verify that the counter was reset by pressing the menu/select button and viewing the counter in the Status menu. See page 25 for details on the Status menu.
30
