Appendix, Specifications | BOXLIGHT XD-10m specs

APPENDIX

Specifications

The projector must be operated and stored within the tempera- ture and humidity ranges specified.

Temperature
Operating	50 to 104° F (10 to 40° C) at sea level
	50 to 95° F (10 to 35° C) at 10,000 feet
Non-operating	-4 to 158° F (-20 to 70° C)
Altitude

Operating	0 to 10,000 feet (3,048 meters)
Non-operating	0 to 20,000 feet (6,096 meters)
Humidity

Operating and non-oper.	10% to 95% relative humidity, non-condensing

Dimensions

6.68 x 8.63 x 2 inches (16.9 x 21.9 x 5.1 cm)

Weight

3.0 lbs. (1.36 kg) unpacked

Optics

Focus Range	4.9 - 16.4 feet (1.5-5 m)
Lamp

Type	120-watt UHP lamp

Input Power Requirements

100-120VAC 2A;50/60Hz

200-240VAC 1A; 50Hz

35

Image 43

BOXLIGHT XD-10m manual Appendix, Specifications

Contents

Page FCC Warning Canada Safety CertificationsEN 55022 Warning Trademarks Declaration of ConformityPage Table of Contents Index Appendix Safety Definitions Safety Symbols Safety InstructionsSafety Terms Important Operating Considerations Customer Service Unpacking the Projector Image ResolutionIntroduction Compatibility T r o d u c t i o n Usage Guidelines If You Need Assistance Warranty Make sure the projector and the computer are turned off Setting UP the Projector T t i n g O j e c t o r Connecting a Computer Connecting a Video Player Turning Off the Projector Powering up the Projector and Adjusting the Image T t i n g O j e c t o r Basic Image Adjustment Using the ProjectorAdjusting the Projector I n g O j e c t o r Using the Remote Control Menu/select Using the Keypad and Remote ButtonsSource keypad only or Data and Video remote only Up/down arrow buttons Reset keypad onlyKeystone + remote only Forward/back buttons remote only Using the On-Screen Menus Keystone Display MenuBrightness Blank screen ContrastTint Color Resize Image Menu for Computer SourcesAuto Image Vertical Position Manual SyncManual Tracking Horizontal Position Video Standard video sources only Image Menu for Video Sources Control Menu Default SourceAuto Source Advanced Menu ResetRear Projection Language Menu Source Computer resolutionStatus Menu Lamp hours used I n g O j e c t o r Cleaning the Lens Maintenance & TroubleshootingReplacing the Projection Lamp Pull the yellow tab on the lamp module Loosen the captive screw on the lamp module I n t e n a n c e Troubleshooting Using the Security Lock Replacing the Batteries in the Remote Control Problem Only the start-up screen displays Troubleshooting Problem The projector is not running Problem Image is too wide or narrow for screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screen Call Boxlight at 1-800-762-5757 or Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts off Appendix Specifications Standard Accessories ship with the projector Accessories Optional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation Chart FN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook Computer Image Width Projected Image SizeDistance to screen Diagonal Maximum Minimum Index D e Page D e Limited Warranty Limitation of Liability