SETTING UP THE PROJECTOR
1Place the projector on a flat surface.
•The projector must be within 10 feet (3 m) of your power source and within 6 feet (1.8 m) of your computer.
•If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 23 to reverse the image.
2Position the projector the desired distance from the screen.
•If the image is too big or too small, use the zoom ring to adjust the size or move the projector forward or backward. Figure 3 shows three projected image sizes. For more infor- mation about image size, see “Projected Image Size” on page 44.
| 1 |
| 1 |
| . |
| 8 |
| f |
| t |
| / |
| 3 |
| . |
| 6 |
| m |
| . |
| 7 |
| . |
| 1 |
| f |
| t |
| . |
3 | / |
2 | |
. | . |
0 | 2 |
f | m |
t |
|
/ |
|
. |
|
9 |
|
m | |
| . |
| 20 ft./6.1 m |
5 ft./1.5 m | 12 ft./3.7 m |
|
FIGURE 3
Projected image size at minimum zoom
3 Make sure the projector and the computer are turned off.
5
