CC408 Operators Guide 21. Domestic Dialling
EN 16
21.Domestic Dialling
Domestic dialling is used to call your mobile phone or a relative/friend in the event your control panel activates an alarm. Up to three different telephone numbers can be programmed for the control panel to call when an alarm occurs. Only your installer can set the system to report in the domestic format, however, the Master Code holder can change the domestic telephone numbers at any time.
21.1Acknowledging Domestic Calls
When an alarm condition occurs, the system calls the first telephone number that was programmed. When you answer an incoming call, you hear the system sound a repeating siren tone followed by a pause, continually for 2 minutes (for example, siren tone, pause, siren tone, and pause).
If you do not acknowledge the call from the control panel during a pause between siren tones, the control panel hangs up after 2 minutes expire, and calls the next telephone number.
Pressing the [*] key for 1 to 3 seconds during the pause acknowledges the call and no further calls are made for that event. If the call is successfully acknowledged, a tone of decreasing pitch is heard.
Table 12: Domestic Dialling Telephone Digits
Digit | Number | Digit | Number |
Required | to Program | Required | to Program |
0 | 0 | 8 | 8 |
1 | 1 | 9 | 9 |
2 | 2 |
|
|
3 | 3 | * | *1 |
4 | 4 | # | *2 |
5 | 5 | *3 | |
6 | 6 | break | *4 |
7 | 7 |
|
|
21.2Programming Domestic Telephone Numbers
If your system is configured for domestic dialling, this function allows any Master Code holder to program telephone numbers the control panel calls in the event of an alarm.
How to Program Telephone Numbers
1.Enter your
[2 5 8 0 2 #]).
Three beeps sound and the STAY and AWAY indicators flash.
If there are telephone numbers already programmed, they are displayed one digit at a time by the codepad indicators.
If there are no telephone numbers programmed, a further two beeps sound after entering this mode. These two beeps are normally heard after the last digit of the last telephone number displays.
2.Enter all digits for the first telephone number (for example, [9 6 7 2 1 7 1 7]).
As each digit is entered, the corresponding codepad indicators display.
3.If there is more than one telephone number to be programmed, press [* 4]. This inserts a break between the first telephone number and the second telephone number. If there is only one telephone number to program, press the [#] key to exit this function.
4.Enter all the digits of the second telephone number (for example, [9 6 7 2 1 0 5 5]). As each digit is entered, the corresponding codepad indicators display.
5.After the last digit of the second telephone number is programmed, press the [#] key to exit this function unless a third telephone number is required. If there is a third telephone number to program, press the [* 4] button to insert a break between the second telephone number and the third telephone number.
21.3Disable Domestic Dialling
To cancel domestic dialling (for example, you are moving and do not want the system to continue calling your mobile phone), enter the following sequence.
1.Enter your
[2 5 8 0 2 #]).
Two beeps sound and the STAY and AWAY indicators flash.
2.Press the [*] button followed by the [4] and [#] keys (for example, [* 4 #]).
The STAY and AWAY indicators go dark.
Bosch Security Systems 5/04 920050O.OG.112
