Bosch Appliances D2071A manual Program Modules, Editing the Program Record

D2071A Operations & Installation Guide 4.0 Program Record

3.8Program Modules

Unlike larger Bosch products, the D2071 Product Handler does not group program items in program modules. When you enter the 2071 program, you are in the Program Item Level.

3.9Editing the Program Record

Each D2071A DACT programming option is listed as it appears in the Programmer Display. The default, a set of selections, and a description follows.

The selections are the only entries available for a particular program option. For example, Account # only uses numbers 0 through 9, letters B through F, or no entry. Do not use unlisted entries.

To edit program options, change the entry and press [ENTER]. If the entry is valid, the programmer moves the cursor to the next prompt. When all program options in the record are edited, the programmer returns to the first program option in the record.

You can exit from any point within the program by pressing [EXIT GROUP] until PRODUCT HANDLERS appears on the D5200 Programmer.

4.0Program Record

The 2071 Program Record selects several functions of the D2071A DACT, including the account number that:

•identifies the location during communication,

•decides how the telephone number is dialed,

•determines how the D2071A is powered, and

•controls the loop response times.

Account #

Default:	Blank
Selections:	0 to 999, BBB to FFF, or Blank

Ensure all entries are right-justified. The blank entry, equaling no account number, sends 000 in pulse that sends nothing in the BFSK format.

Transmit BFSK

Default:	Yes
Selections:	Yes or No
Yes	Transmit in BFSK format with
	2300 Hz acknowledgement.
No	Transmit in fast, single-round,
	expanded pulsed format with a
	checksum digit and 2300 Hz
	acknowledgement.

Use to select the reporting format.

DTMF Dialing

	Default:		Yes
	Selections:		Yes or No
	Yes		Dual tone multi-frequency dialing of
			telephone numbers.
	No		Pulse dialing of telephone numbers.
PriPre
Default:			Blank
Selections:			0 to 9, B to F, or Blank
Blank		No prefix or area code. A delay up
		to 7 sec is automatically inserted in
		front of the prefix.

Use to select the prefix for the primary receiver telephone number. You can enter up to nine characters. Refer to Table 9 on page 21 for other dialing character selections.

2 0 Bosch 09/04 74-06200-000-F