18 en Hardware Installation | RAID Subsystem |
|
|
Installation Procedure Flowchart
Table 3.1 shows a flowchart of the installation procedure. As you complete each step, check off the “Done” box on the right. Please use this flowchart in conjunction with the instructions that follow.
|
|
| Installation Procedure |
| Done |
|
|
|
|
|
|
|
|
| |
| 1 |
| Unpack |
|
| See Section 3.5 Unpacking the Subsystem | |
|
|
|
|
|
|
|
|
| 2 |
| Rack/Cabinet Installation |
|
| See Section 3.6 | Rack/Cabinet Installation |
|
|
|
|
|
|
|
|
| 5 |
| Drive Tray Installation |
|
| See Section 3.7 | Drive Tray Installation |
|
|
|
|
|
|
|
|
| 6 |
| Cable Connection |
|
|
|
|
|
|
|
|
|
|
| |
| 7 |
| Power On |
|
| See Section 5.3 Power On | |
|
|
|
|
|
|
|
|
| Table 3.1 | Installation Procedure Flowchart |
|
|
| ||
3.5 | Unpacking the Subsystem |
|
i
Use the Unpacking Checklist in your package to verify package contents. Carefully check the items contained in each box before proceeding with installation.
NOTICE!
A detailed packing list can be found in your product shipping package or product CD.
3.6 | Rack/Cabinet Installation |
| The 2U RAID subsystem has been designed to fit into a standard cabinet or rack. Two (2) slide |
| rails are available for installing the subsystem into a rack or cabinet (see |
| Section 8.2 Accessories). The subsystem should be installed in the rack or cabinet before the |
| hard drives and the drive trays are installed. If the drive trays with the associated hard drives |
| are installed, the subsystem will be too heavy to mount into a rack or cabinet. When installing |
| the subsystem into a rack or cabinet it is advisable that three (3) people assist in the mount- |
| ing process. |
| To install the subsystem into a rack or cabinet, please refer to the installation instructions that |
| came with the slide rails. |
3.7Drive Tray Installation
Once the hard drives have been installed in the drive trays, the drive trays can be installed into the RAID subsystem.
CAUTION!
All drive trays must be installed into the enclosure even if they do not contain a hard drive. If the trays are not installed into the enclosure, the ventilation required for cooling will not be normalized and the subsystem will overheat.
1. All drive trays must be installed into the enclosure even if they do not contain a hard drive. If the trays are not installed into the enclosure, the ventilation required for cooling will not be normalized and the subsystem will overheat. Make sure the
F.01U.027.798 V1 2006.06 | Bosch Security Systems |