Bosch Appliances EX14 instruction manual Initial Preparations, Installation Guidelines

14 en Initial Preparations EX14 Marine Camera

3Initial Preparations

1.Determine the operating voltage at the installation site. The camera’s Voltage Regulator Board accepts 12-24 VDC/ VAC input without change to internal connections

2.Determine the optimum mounting location for the camera. See Section 4 Camera Mounting, page 15.

3.All cameras have been tested and pre-focused with telephoto setting as factory default prior to shipment. If any adjustment needed, it is advisable to check the camera’s operation before installation.

3.1Installation Guidelines

–Refer to Section 4 Camera Mounting, page 15, for installation instructions.

–It is important that these steps are followed in numerical order.

–This installation must be made by a qualified service person and must conform to all local codes.

F.01U.240.878 1.0 2011.07 Instruction Manual Bosch Security Systems, Inc.