EX14 Marine Camera | Camera Connections en 19 |
|
|
5.2LED Array Adjustments
The LED Array sensitivity has been set at the factory before shipment. For photocell sensitivity adjustment refer to the following illustration:
1Power to LED Array
2 Photocell Adjustment
–CW - Increase sensitivity
–CCW - Decrease sensitivity 3 12 V Enable
4 Power Input
NOTE: Use a Neutral Density filter or Infrared Pass filter to cover the lens during focusing to simulate low light conditions on scene for correct 24 hour focusing. The camera should be focused with the lens iris fully opened to simulate the worst possible depth of field. Using a Neutral Density filter of Infrared Pass filter will ensure the iris is fully open for correct setup and adjustment.
Bosch Security Systems, Inc. | Instruction Manual | F.01U.240.878 1.0 2011.07 |