D9000,G & GV2 Series Owner's Manual Supplement
10.3Cycle Door?
1.To momentarily unlock an access door and allow a person into an area, press [ENT] at the Cycle Door? prompt.
The display shows CYCLE 1 2 3 4 5 6 7 8 if all doors are in a normal state and available. If a door is not in a normal state, the number of the door is replaced with one of the symbols indicated in Table 1.
Table 1: Key to Symbols
Symbol | Description |
---Door is not active, not in scope, or user does not have access level authority
CDoor is timed door sequence
UStrike and shunt are latched active (held open)
XStrike and shunt are deactivated (secured)
PThere is a problem with the door; call your security company
2.Enter the number of the door to cycle then press [ENT]. This door cycles and the display changes to reflect the new status of the doors. For example, to cycle Door 3, at the following prompt:
CYCLE DOOR 1 2 3 4 5 6 7 8 press [3], then [ENT]. The display shows:
CYCLE DOOR 1 2 C 4 5 6 7 8
This indicates that all doors are in a normal state, except for Door 3, which is cycled.
3.Press [ESC] to leave this subfunction, or enter another door number to cycle.
Bosch Security Systems 5/05 33267F | 13 |
